Leica Geosystems GPS System 500 Equipment - User Manual User Manual
Page 42
42
GPS Equipment User Manual - 4.0.0en
Getting started with the new Survey equipment
Notice that the position mode icon
has changed to static mode, indicated
by a symbol of a tripod.
During data logging, attribute informa-
tion can be entered into the appropri-
ate input fields. In this example,
‘Utility‘ has been entered for Attrib 1.
Once a sufficient amount of raw data
has been collected, you can stop data
collection by pressing F1 STOP.
Data collection times will
depend on the situation. If
the unit is being used as a
reference for post processing, then
data must be continually logged until
all roving receivers have stopped
collecting data. If the unit is operated
as a roving receiver the site occupa-
tion time depends mainly on the
baseline length and your accuracy
requirements.
The information shown hereon is only
intended to get you up and running
with your new GIS equipment. Please
refer to the “Getting Started with the
GS50 Sensor” and “Getting Started
with GIS DataPRO” manuals for more
detailed information of your new GIS
system.
QuickStart Tutorial - GIS Data Collection, continued
Getting started with the new GIS equipment