What the confirmation tone means, Programmable preparations – Panasonic KX-TCM424-W User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programmable Preparations
You can program the following functions by using the handset near the
base unit. See the noted pages for details.
The TALK and DIGITAL SP-PHONE indicator lights must be off
before programming.
Lift the handset, then press [PROGRAM/2WAY RE^.
Press fSCREEN/PLAYBACKl.
>lf an alarm tone sounds, move
towards the base unit, then try again.
To adjust the time and day, press
{page 16)
To set the remote code, press (T).
(page 43)
To select the number of rings, press
(page 18)
To set the CPC function, press (3).
(page 19)
To set the greeting monitor function, press ®.
(page 19)
To select the caller’s recording time, press ®.
(page 17)
To store the pager number, press
(page 40)
When finished, press (PROGRAM/2WAY RECl.
•A confirmation tone sounds.*
•To cancel during programming, press [ PROGRAM/2WAY RE^. then start
from the beginning.
• If 6 beeps sound during programming, a wrong key was pressed.
Enter the correct number again.
*What the confirmation tone means
1 beep: The new programmed number is stored.
2 beeps: The number is the same as the previously stored one.
6 beeps: The number is not correct. Try again from the beginning.
If a power failure occurs, the setting will return to the factory preset.
Reprogram if necessary.
15