Hold switch, If discs are dirty, If the lens is dirty – Panasonic SL-XP505 User Manual
Page 18: If the cabinet is dirty, Stereo earphones, Maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stereo Earphones
(continued)
•When pressing the button twice or three times in succession, press it within one second and
at equal intervals.
•Volume can be controlled with the phones level control of the main unit. Make sure to adjust
the phones level control of the unit to 5-7 position.
•The Operation Indicator lights during playing and flashes in the stop mode. (The indicator is
turned off in a power off condition.)
Hold switch
If setting the hold state by sliding down the Hold switch, the Remote control button can not be
pressed. This prevents the Remote control button is pressed by mistake.
Maintenance
(Be sure to switch operation “OFF" first. If
you are using the AC adaptor, disconnect it
before cleaning.)
■ If discs are dirty...
Clean with a soft, damp cloth, and wipe dry.
■ If the lens is dirty...
A dirty lens will cause sound skipping and,
if the lens is very dirty, disc play may not be
possible. Open the disc holder and clean
the lens as shown in the figure.
Cleaning kit (option)
Part number; SZZP1038C
• For dust on
the iens
Lens
Air blower for
camera lens
»Use a cotton swab
to clean away
fingerprints, etc.
on the lens.
Always from the
center to outward.
Scratches caused by
wiping in this direction
can create noise.
■ If the cabinet is dirty...
Wipe with a soft cloth. If the cabinet is very
dirty, dampen the cloth with a weak solution
of neutral detergent and water, and then
wipe clean.
_ 1 f t -