Panasonic QTR 2140 - Manual (Page 16)

Note that this selection only applies to
CVBS output.
USER’S MANUAL
2. Display type
This menu contains three options: CRT,
Plasma (low delay), and Plasma (high
delay). Normally, different display
equipment may have different delay in
picture which may cause slight
problem in lip sync. This feature allows
you to use ■</► to select your choice
according to your actual video display
equipment, in order to compensate this
delay. If your display is TV or CRT.
choose CRT. If your display is Plasma,
choose Plasma (low delay) or Plasma
(high delay) depends on which choice
appears to provide best performance in
lip sync.
16:9 Wide
3. MPEG Audio Level
From here you my adjust MPEG audio
level from -12 db to 0 db. This
adjustment is only for MPEG input and
system
will detect MPEG Input
automatically.
4. Audio Language Priority
From here you may prioritise
languages for audio output. To
prioritise a language, press 3S to
highlight a language choice. Move the
choice up or down by using t!ie arrow
buttons. Press again to confirm the
priority.
Note that this priorit^^ applies when you
view new services. That is, the
receiver will select available audio
soundtrack with highest priority as the
default soundtrack. However, you may
select any available soundtrack at your
own will for each channel, and that
selection will not be affected by your
choice of language priority.
15