F) care of filters, G) how to store your cleaner – Panasonic MC-E852 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F) CARE OF FILTERS
The vacuum cleaner has two filters, one central filter
installed in the dust bag compartment that protects
the motor (Fig, 1). The other, clean air filter (electro
static), is installed in the exhaust cover situated in the
top rear side of your cleaner, and it retains any small
dust particles which may be present in the exhausted
air (Fig. 2).
It is advisable to change the clean air filter when it
becomes dirty. As a guide, once or twice a year is
usually sufficient.
When you change the clean air filter (non washable),
we advise that the central filter is washed. Simply
rinse it out in warm water and dry thoroughly before
replacing.
CENTRAL FILTER (Fig. 1) Part no. AMC8GF03D1000
To remove the central filter, hold at the top (as illus
trated) and pull it up.
Important: Ensure that the filter is dry before
re-installing it into the cleaner.
CLEAN AIR FILTER (Fig. 2, Fig. 3)
Part no. AMC8GF28D1000
To change the clean air fitter, lift up the exhaust cover
and remove the filter support as shown in Fig. 2 and
Fig. 3.
IMPORTANT: Do not forget re-install the filters
before use.
Fig. 1
G) HOW TO STORE YOUR CLEANER
The vacuum cleaner includes a clip system, which is built onto the
body of the cleaner, which will keep the extension wand, hose and
nozzle in a vertical position for easy storage.
Panasonic Australia PTY Limited
1 Garigal Road
BELROSE NSW 2085
AUSTRALIA
Z07D9090
Fisher & Paykel
Customer Services Division
PO Box 14-444
Panmure
AUCKLAND - NEW ZEALAND
Printed in Soain