Panasonic CF-48 - Manual (Page 27)

@ Press [Restart Computer]. Select ‘^Windows NT
Workstation Version 4.00” and press [ Enter).
Д моте )-
^ Following the display, press i Ctrl ) + f Alt 1 +
CUD.
Input the password set in step @ and select
[OK], then select [Close] at the [Welcome] display.
• As the computer starts up, it will be necessary to
input the password set in step (б).
• Following this, if [Press any key to continue...] is
displayed on the MS-DOS screen, press [Enter],
(П) Install Touch Pad driver.
(At the [Welcome], select [Next] and follow the on­
screen instructions. When the installation completes,
select [No, I will restart my computer later], and then
select [Finish].)
@ Install Intel (R) Speed Step (TM).
(At the [Welcome], select [Next]. When the installa­
tion completes, select [No, I will restart my computer
later], select [Finish].)
@ Follow the on-screen instruetions and install ESS
Allegro 1 Utility.
(At the [Welcome] display, select [Next]. Confirm
[Upgrade Drivers] is selected, then select [Next].
When the installation completes, select [No. I will
restart my computer later], then select [Finish].)
@ Install Phoenix АРМ 2.0 for Windows NT.
When the installation completes, select [Don't Restart
Now].
@ Install Phoenix Card Executive™ for Windows NT.
When the installation completes, select [Restart Now].
(1^ The [Begin Logon] display will appear. Perform the
operation in step@.
@ Select [Next] at the [Card Executive 2.0 for NT Di­
agnostics].
Select [Next], then select [Finish].
Windows will restart.
@ The [Begin Logon] display will appear. Perform the
operation in step@.
@ Double-click the [Internet Explorer] icon to install
Internet Explorer,
@ Select [I accept the agreement], then select [Next].
@ Select [Install Minimal, or customize your browser],
then select [Next].
@ Select [Full] by clicking 0, then select [Next].
@ At the [Restart Computer], select [Finish].
@) The [Begin Logon] display will appear. Perform the
operation in step@.
@1 Set the correct settings for all items in [Control Panel]-
[Regional Settings] and [Date/Time] etc.
Install the Acrobat® Reader 4,0. (Q^ page 13)
№/V.in3ôw^NJj|
About Differences between Factory Condition and
After Reinstallation
The condition after reinstallation differs in the following
points with the factory condition.
• During startup, the ATI video driver’s [DeskTop Help]
is displayed (remove the check mark for [Show this
screen next time you start Windows]).
• The ATI icon is displayed in the task tray (remove the
check mark for [Enable ATI Taskbar Icon] in [Dis­
play Properties] - [Options]).
• [Information about your TouchPad] is displayed dur­
ing startup (remove the check mark for [Show this
message the next time Windows starts]).
• After the reinstallation, the free space on the hard disk
is taken as the primary partition (delete the free space
in [Start] - [Programs] - [Administrative Tools (Com­
mon)] - [Disk Administrator]).
27