Panasonic DVD-RV41 - Manual (Page 8)

■Q
co
I
o
O
DVD-RV41 I DVD-RV31
These pages explain how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. Connections and
procedures that enable you to enjoy more powerful sounds are described beginning on page 26.
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 4 BEFORE CONNECTION. Before connection
• Disconnect the AC mains lead.
• Refer to the television’s operating instructions.
Connecting to a television with video input terminal (The illustration shows DVD-RV31 for the United Kingdom and Continental Europe.
See below if your television has a SCART terminal, S video terminal, or component video terminals.
©Television AUDIO VIDEO
IN IN
L (§K
(o)
Conserving power
This unit consumes a small amount of power,
even when it is turned off.
For the United Kingdom and Continental Europe
© (Red)(White){Yellow)
© Audio/video cable (included)
© To household
mains socket
f
approx. 4 W
approx. 3 W
© AC mains lead--------
(included)
(Red)(White)(Yellow)
© Back of the unit
^9
№ R
BDDDOOOPaD
PDDDQDDDQD
approx. 3.5 W
To save power when the unit is not to be used for
a long time, unplug it from the household mains
socket.
Connect Your Unit Directly
to Ypur Télevt#îortV
, Do not, : vCQnnnct^
; thicougbypur yiàëop^slliè re-;
: corder when setting ■ ; up your ^
because the picture may not
be played correctly due to the
Connecting to a television and a video cassette recorder with 21-pin SCART terminal
SCART terminal(s): for the United Kingdom and Continental Europe only
To improve picture quality, you can change the video signal output from the AV (AV1) terminal from “Video” to either “S-Video” or “RGB” to suit the
COMPONENT VIDEO OUT terminals: for Australia, N.Z. and Asia only
Connect the audio terminals as described above.
© S video cable (not included)
® TV’s S I
video input ^
terminal
SQ31m
Video cable (not included)
it ^ Y terminal
■í3> <0= P b terminal
P r terminal
TV’s component video
input terminals
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
RQT5869
Connection using these terminals outputs the color difference signals
(P
b /P r ) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors.
•The description of the component video input terminals depends on
the television or monitor (e.g. Y/P b /P r , Y/B-Y/R-Y, Y/C b /C r ). Con­
nect to terminals of the same color.