Mlipgi^gflihe dust bag – Panasonic MC-V6602 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MlipGi^GfliHE DUST BAG
xÌÌÌ^:3fc'K$SKSS:Ìiffr>j'iii;fМ:М^^
*
■
■■;
Always operate ths vacuum with a genuine Panasonic Type U3 Standard or U6
Electrostatic dust bag Installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer. An optional cloth bag is available.
1. Pull outward on the
dust cover grip, located
on thè top of the dust
cover and
remove the
cover,
Oust Cover
Grip
Dust
Cover
—
2. To remove the dust
bag, grasp the card
board portion of №e
dust bag and pull
it out.
3. Spread out the end
of the new dust bag.
NOTE: Pull carefully so
as not to tear the bag at
the folds.
□ o
4. Attach the new dust bag
onto the bag holder by hold
ing the cardboard portion
and pushing back as illus
trated.
5. Reinsert the tab
provided on the end
of the dust cover into
the groove on the dust
compartment to
allow the cover to
rotate closed.
NOTE: The
dust cover
must be
completely
and correctly
installed for proper
operation.
Groove
6. Rotate the dust cover up into the
closed position and press into
place.
NOTE: The dust bag
should not
be caught
between
the tower
edge of the
dust cover and
the gasket as indi
cated by the arrow in
the illustration.
-
13
-