Panasonic OMNIVISION VHS PV-M2767 - Manual (Page 24)

^^^Tape Operation
Your Combination VCR is equipped with
several time saving features as well as
convenient automatic functions which make
tape operation easier than ever.
Auto Operation Functions
Auto Shut Off
In TV or Game mode, when a broadcast
signal is not received for 5 minutes, the
Combination VCR wiil automatically power off
(except when LINE INPUT is selected).
In Playback mode, when a Video signal is not
detected for 5 minutes, the Combination VCR
will automatically power off and the tape
will be rewound.
• This feature is deactivated when any
button on the unit or remote control is
pushed even if there is no signal present.
Auto Playback
When a tape is inserted, the power turns
on (Auto). If the record tab* is removed,
playback begins (Auto).
Auto Rewind
When a tape reaches its end during playback,
fast forward or manual record the Combination
VCR will rewind and go into Stop mode.
Playback Auto Eject (Repeat Play is “OFF.”)
When a tape without a record tab* is played
to its end, the Combination VCR will rewind
and then eject the tape.
Rec Auto Eject
After a tape reaches its end during
normal recording, the Combination VCR will
rewind and then eject the tape.
Memory Rewind Off
When POWER is pushed during rewind,
rewind will be completed even though the
Combination VCR turns off.
*For record tab information, see page 29.
Repeat Play
You can set your Combination VCR up to play a recording over and over.
Push MENU to
display the MAIN
MENU.
®l o
Pushik T <1 [> to
select “VCR,” and
then push MENU
to display the SET
UP VCR screen.
MAIN MENU
CH
dICTDl
©
CLOCK
EL
IxTT
SELECT KEY
SET :MENU KEY
j Push repeatedly
I to select “ON” or
i “OFF.”
............ SET UP VCR ...................
REPEAT PLAY : OFF
SELECT : A T KEY
SET :► KEY
END :MENU KEY
When REPEAT PLAY : “ON” is selected, the Combination VCR will
play to the end of a tape, or until it reaches a blank portion 30 seconds
or more. (Erased portions of tape are not considered blank.) Then, the
Combination VCR will automatically rewind the tape and play it again
and again until you cancel repeat play. The REPEAT indicator lights on
the front panel.
All function buttons (REW, FF, etc.) are operational during Repeat Play.
Push MENU to exit the SET UP VCR
screen. Then push E^to select
“EXIT.” Now, push MENU to exit the
MAIN MENU.
You may also turn the repeat play feature on and off at the
Combination VCR by pushing PLAY during playback once
or twice until the repeat indicator lights up (ON), or goes out (OFF).
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
Push ZERO/1MIN in Play mode.
• The Combination VCR will go into FF search mode
and skip over 60 seconds of recorded time.
Then, normal playback will resume.
ZERO/
^ 1 MIN
Zero Search
You can reset the Timer Counter to zero and then return to that point.
Push DISPLAY to f
STOP
display the Time
I Counter overlay.
DISPLAY
icoy^ER
a
I RESET
Push COUNTER
RESET to reset the
Time Counter.
• Reset to 0:00:00 at
whatever point you wish
on the tape.
12:00AM WNET
0:00:30
SLP
ZERO/
a
1 MIN
STOP 12:00AM WNET
0 : 00:00
SLP
Push ZERO/1MIN in
Stop mode.
• The Combination VCR will go into FF or REW
mode and stop at the last point the Time Counter
was set to 0:00:00.
24