Using the vtr as a hi-fi audio recorder, Mini i'm – Panasonic NV-F55EA User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

Using the VTR as a Hi-Fi Audio Recorder

AUDIO IN AUDIO OUT

Preparation

•Connect the VTR to the Hi-Fi audio system. (Example of a

connection diagram is shown).

• Insert a video cassette with the erasure prevention tab

intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.

•Switch on the Hi-Fi audio system and select an audio

source.

Hi-Fi Audio Recording

Note:

Selection of an audio track is not necessary for

recording.

Press the Input Signal Selector on the Remote

Controller to select the “A1 ” programme position (or ■
select with the Channel Up or Down Button on the

VTR).

To start the recording, press the Record Buttons.

To achieve smooth transitions between adjoining

recordings, see notes on page 42.

Hi-Fi Audio Piayback

• Repeatedly press the Audio Output Mode Selector Button

so that the “Left” and “Right” Audio Output Mode

Indicators light up (for playback of both mono and stereo
recordings).

•To start the playback, press the Play Button (►).

Adjustment of the Hi-Fi Audio Recording Level_________

Setting the Hi-Fi Rec Level Controls to the centre “5”
position (click stop) assures satisfactory audio recording

results in most cases. When using the VTR as a Hi-Fi audio
recorder or when producing your own video tapes, it may be

desirable to adjust the Hi-Fi Rec Level Controls to some
other position.

(It is recommended to adjust so that peaks in the audio level
reach about -i-4 dB.)

Hi-Fi REC LEVEL

0 I

I I I I B I I I I

■mrm-

-Mini I'm-

FM Stereo Tuner

•The sound to be recorded on the “normal” audio

track will be adjusted automatically.

Record Player

Advertising