Warning – Panasonic QUICKDRAW MC-V5746 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A

WARNING

Electrical Shock or Personal Injury Hazard.

Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so

could result in electrical shock or personal injury from cleaner suddenly starting.

Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, shouid be performed by an authorized service
representative.

PROBLEM

POSSiBLE CAUSE

POSStBLE SOLUTION

Cleaner will

not run.

1. Unplugged at wall outlet.

2. ON-OFF switch not turned on.

3.

Tripped circuit breaker/blown

fuse at household service panel.

1. Plug in firmly. Push ON-OFF

switch to ON.

2. Push ON-OFF switch to ON.

3.

Reset circuit breaker or replace

fuse.

Poor job of dirt
pickup.

1. Full or clogged dust bag.

2. Broken belt.

3. Carpet-bare floor setting incorrect.

1. Change dust bag.

2. Replace belt.

3. Set in the correct position.

4.

Clogged hose or nozzle.

5. Hose not inserted fully.

6.

Worn agitator.

7. Hole in hose.

8. Dust cover improperly installed.

9. Belt not installed on motor shaft.

4.

Clean hose or nozzle area.

5. Insert hose.

6.

Replace agitator.

7. Replace hose.

8. Properly install dust cover.

9. Install belt on motor shaft.

Bare floor option

will not work.

1. Belt improperly installed with bare

floor selector in wrong position.

1. Properly install belt.

Dust escapes

the paper bag.

1. Bag improperly installed.

2. Bag torn.

1. Properly install bag.

2. Replace bag.

Light will
not work.

1. Burned out light bulb.

1. Replace light bulb.

- 2 0 -

Advertising