Panasonic RC6088 - Manual (Page 5)

Placement
1. Ventilation -- The unit should be
situated so that its location or position
does not interfere with its proper
ventilation. Allow 10 cm (4") clearance
from the rear of the unit.
2. Foreign Materiai - Care should be
taken so that objects do not fall into and
liquids are not spiiied into the unit. Do
not subject this unit to excessive
smoke, dust, mechanical vibration, or
shock.
3. Magnetism - The unit should be
situated away from equipment or de­
vices that generate strong magnetism.
4. Stacking - Do not place heavy objects
on top of the unit.
5. Surface - Place the unit on a flat, level
surface.
6. Carts and Stands - The unit should be
used only vnth a cart or stand that is
recommended by the manufacturer.
The unit and cart combination should
be moved with care. Quick stops,
excessive force, and
uneven surfaces may
cause the unit and cart
combination to overturn.
7. Waff or Ceiling Mounting - The unit
should not be mounted to a wall or
ceiling, unless specified in this oper­
ating instructions.
Maintenance
Clean the cabinet, panel and controls with
a soft cloth lightly moistened with mild
detergent solution.
Service------------------------------
Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol
or benzine.
1. Damage Requiring Service-The unit
should be serviced by qualified senrice
personnel when:
(a) The 'AC power supply cord or the
plug has been damaged; or
(b) Objects have fallen or liquid has
int/% I init* #%r
(d) The unit does not appear to operate
normally or exhibits a marked
change in performance; or
(e) The unit has been dropped, or the
enclosure damaged.
2. Servicing - The user should not at-
t/v 4Kn I mif fKnf