Programming summary for the answering system – Panasonic KX TC1503B User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming Summary for the Answering
System
You can program the following functions using the handset near the
base unit. See the page numbers below for details.
The TALK indicator iight must be off before programming.
• If an alarm tone sounds, move closer to
the base unit and try again.
To adjust the time and day, press (O).
{page 18)
To set the remote code, press Q].
(page 35)
To select the number of rings, press [2].
(page 20)
To select the line mode, press (3].
(page 13)
To select the caller’s recording time, press (s).
(page 19)
•The base unit display shows numbers or characters related to the
adjustment or settings.
Press [ REDIAL/PAUSE/PROGRA^.
•A beep sounds.
•If 6 beeps sound, the setting is not correct. Start again from the beginning.
•To cancel during programming, press
[OFF].
Start again from the beginning.
• If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
17