Panasonic WJ-300C User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1. Power ON/OFF Switch (POWER ON/OFF)

2. Power Indicator

This indicator lights when the power switch is turned

on,

3. Handle/Lock Ring (LOCK)

This ring should be used when the unit is mounted

on the rack,

4. Input Selection Switch (THR/SEP)

This switch is used when selecting the input signal

from single input or dual input,
(a) THR position

When a single video signal is supplied to the

Input A Connector (5) or Input B Connector (10),

set this switch to THR position (Fig, 1). This will

provide six (6] identical and isolated outputs

to the Output A Connector (6) and the Output

B Connector (7), The Termination Switch (11)

should be set to 75ii position (Fig. 1),

THR SEP

75ii Hi-Z~]

Fig, 1

Note:

When bridging or looping through the input

signal, set the Termination Switch (11) to Hi-Z

position (Fig. 2).

THR SEP

i

(b)

75n Hi-Z I

Fig, 2

SEP position

When the two (2) different video signals are

supplied to the Input A Connector (5) and the

Input B Connector (10), set this switch to SEP

position (Fig, 3). This will provide three (3)

identical and isolated outputs to the Output A

Connector (6) and the Output B Connector (7)
for each input,

THR SEP

75fi Hi-Z^

Fig. 3 ■

- 4 -

Advertising