Panasonic SL-PD347 - Manual (Page 7)

Basic Operating Procedure
DISC SKIP
2 * 4
o
^ o"o u
H
1
Press POWER to switch on the power.
2
Press OPEN/CLOSE to open the loading
drawer.
3
Load the disc(s) on the disc tray(s).
Do not load 8 cm (3") and 12 cm (5”) discs on the same disc
tray.
The number (1 -5) by the disc tray indicates the disc number.
4
Press OPEN/CLOSE again to close the load­
ing drawer.
•You can skip this step by pressing PLAY.
The loading drawer will be closed automatically then play will
start.
• Do not attempt to close the drawer by hand. Be sure to press
OPEN/CLOSE.
5
Press PLAY.
CAUTION;
Do not move this changer with a compact disc inside the unit.
If a disc comes off the disc tray, it might be scratched or the
changer might become incapable of playing. Refer to page
22 before moving the unit.
After loading discs on the two disc trays at the front position,
press DISC SKIP to move the carousel. Different two disc
trays wili be at the front position each time DISC SKIP is
pressed.
Note;
Do not touch the carousel nor the loading drawer while
it is moving.
Do not turn the carousel forcibly by hand because it
may fail to operate normally.