Panasonic PV-4651 - Manual (Page 16)

/ п
— Т а р е Operation
Your VCR is equipped with several time
saving features as well as convenient
automatic functions which make tape
operation easier than ever.
Auto Operation Functions
Auto Playback
When a tape is inserted, the power
comes on (Auto). If the record tab*
is removed, playback begins (Auto).
Auto Rewind
After a tape reaches its end during
playback, fast forward or manual
record, the VCR will rewind and
go into Stop mode.
Playback Auto Eject
After a tape without a record tab*
is played to its end, the VCR will
rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pushed
during rewind, the VCR will turn off
after rewind is complete.
Eject Cassette
A cassette may be ejected with power
on or off.
* For record tab information, see page 5.
16
Repeat Play
You can set your VCR up to play a recording over and over.
Push MENU to
display the menu.
MENU
Rotate and push the
WHEEL to select SET
UP VCR.
MENU
SET CLOCK
SET UP CHANNEL
ID10МА/LANGUE:ENGLt SH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
................ SET UP VCR ---------------------
REPEAT PLAY ON
BEEPER : ON
INPUT SELECT : TUNER
SET AUDIO MODE
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate the WHEEL to
select “REPEAT PLAY”,
then push to select
“ON”or OFF.”
The VCR plays to the end of a tape, or until a blank portion of 30 seconds or more
is reached. (Erased portions of tape are not considered blank.) The tape is then
automatically rewound and played again and again until Repeat Play is cancelled.
All function buttons (REW, FF, etc.) are operational during Repeat Play.
Push MENU twice to
leave this screen.
MENU
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
ZERO/1MIN о
Push ZERO/1MIN
in Play mode.
The VCR will go into FF search mode and skip over 60 seconds
of recorded time. Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
nicpiAv Push DISPLAY to
display the Time
Q Counter overlay.
COUNTER
RESET
Push COUNTER RESET
to reset the Time Counter.
• This may be done at as many
places as you wish on the tape.
STOP 12;00AM CH08-
0:00:30
SLP
STOP 12:00AM CH08
0 : 0 0 : 0 0
SLP
Push ZERO/1MIN
zER^iN in Stop mode.
• The VCR will go into FF or REW mode and stop at the
last point the Time Counter was set to 0:00:00.