Panasonic TOUGHBOOK CF-47 - Manual (Page 18)

starting Up/Shutting Down
Using the CD-ROM Drive
Title-side up
Installing-the CD
□
y Turn your computer on
2 Press the eject button
^ Secure the CD on the center holder
4 Close the tray
Eject Button
Do not place items other than CDs on the tray.
Do not leave the tray in the open position. Also, do not touch the lens area with your fingers.
When the tray is opened, applying too much force to it could cause it to break,
Do not open the CD-ROM drive or move the computer while an application is in the process of accessing the CD-ROM
drive. Doing so could cause it to malfunction.
Cleaning the CD-ROM drive using a CD lens cleaner (except the liquid type cleaner) is recommended if it malfunctions.
Do not use the CD-ROM drive in a location where there is a lot of oily smoke or tobacco smoke. Doing so could shorten
the service life of the lens.
Never insert foreign objects such as paper clips into the slot in the CD-ROM drive.
Do not use CDs that have become deformed (warped, not completely round, etc.).
c
Using-the CD-ROM-pack-in-the~MS-DOS-mode
J
1 8
1
Click the jStart] button then select [Shut Down).
2
Select [Restart in MS-DOS mode) and click [OK].
3
Open the "CONFIG.SYS" file for editing by issuing the following commands:
cd\t Enter )
edit config.sys C Enter )
4 Move the cursor to the line containing "TEAC_CD1.SYS" or "OAKCDROM.SYS", and
delete the characters "rein" at the beginning of the line. (Deleting "rem" cau.ses the item to
become valid.)
DEVICEHIGH=C:\W!NDOWS\COMMAND\TEAC_CDl.SYS /D:MSCD000
DEVICEHlGH=C:\WINDOWS\COMMAND\OAKCDROM.SYS /D:MSCDOOO
(If this line is missing, add it.)
5 Press ( Alt ^ -f( F ) , thenC S ) to save the file. Then press C Alt ] +C~F~). thenC X ) to exit
the Edit program.
6 Follow the same steps to edit the "AUTOEXEC.BAT" file,
edit autoexec.bat C Enter )
7 Move the cursor to the line containing "MSCDEX.EXE" and delete the characters "rem" at
the beginning of the line. (Deleting "rem" causes the item to become valid.)
LOADHIGH C:\W1ND0WS\C0MMANDW1SCDEX.EXE /D:MSCD000 /L:L
(If this line is missing, add it.)
8 PressC Alt ^ 4-CED ^ thenC S 3 to save the file. Then press C Alt ) thenCX^ to exit
the Edit program.
9 Restart the computer.