Pip operation with a vcr and cabie box, Pip operation with a vcr and cable box, Picture in picture (pip) operation – Panasonic Color Television CT-27G24 User Manual
Page 7: Pip) o, Procedure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
I
n
P
icture
(PIP) O
peration
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cabie Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown. (Some models
have only one video input and some models have an S-VIDEO video input.)
TERMINALS ON BACK OF TV
VCR
CABLE BOX
Note:
The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box. See
Programming the Remote
Control In the
Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main fxcture, initially.
To view a different picture in the PiP frame:
•
Press the TV/VIDEO button on the Remote Control to select
the video PiP source.
•
Verify the CABLE BOX and VCR are ON and the VCR is
tuned to channel 3.
•
Choose channeis for the
PIP
frame by pressing the CBL
button on the Remote Controi and using the numeric keypad
or CH up/down buttons.
•
Choose channels for the
Main Picture
by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
The SWAP button switches the PiP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.