Removing clogs – Panasonic ASPIRADORA MC-V5740 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Removing Clogs

Quitar de los residuos de basura en los conductos

The hose located on the back of the vacuum cleaner carries the dirt from the nozzle up to the
dust bag. If the hose should become clogged:

La manguera situada en la parte posterior de la aspiradora lleva el polvo de la
boquilla hasta la bolsa de polvo. Si hay residuos en la manguera:

Unplug vacuum

Desenchufe la aspiradora

Hose

Manguera

Press two tabs and pull open suction inlet and

check for clogging

Para revisar si hay residuos oprima las dos lengüetas y tire

para abrir ¡a abertura de aspiración

>- Disconnect hose from short hose and check the

Lengüetas

hose for clogging

Desconecte el manguera de la manguera corta y

revise por residuos en la manguera

Plug in vacuum cleaner and turn on

Enchufe la aspiradora y enciéndala

Stretch hose in and out to remove clog

Estire la manguera hasta la extensión máxima y
mínima para quitar los residuos

If clog still exists, turn vacuum cleaner OFF and
UNPLUG POWER CORD

Si ya hay los residuos, apague la aspiradora y Desenchufe el
cordón eléctrico

>> Remove lower plate

Quite la base inferior

Remove short hose from nozzle by lifting

straight up

Levante hacia arriba para quitar la manguera

corta de la boquilla

>■

Inspect hose end and clear any obstructions /

Revise el extremo de la manguera y quite los
obstáculos

>~

Reinstall short hose

Reemplace la manguera corta

Reinstall lower plate

Reemplace la base inferior

Suction
Inlet

Abertura de

aspiración

Short Hose

Manguera
corta

-

18

-

Advertising