Panasonic WV-CB700A User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
127. Auto White/Auto Black Set Switch
(AWC/HOLD/ABC)
This switch sets the white balance and black
balance automatically as foNows;
AWC:
This position is used for setting the white
balance
when
the
White/Black
Balance
Selection Switch (126) is set to the A or B
position of the White/Black Balance Selection
Switch. White balance adjustment is required
when "AWC A NG" or "AWC B NG" is displayed
in the viewfinder or when the Auto Warning
Indicator (129) on tights.
HOLD:
In this position, the white and black balances
set at the AWC or ABC position can be held
fixed, if so desired, for at least one year.
ABC:
This position is used for setting the black
balance
when
the
White/Black
Balance
Selection Switch (126) is set to the A or B
position. Black balance adjustment is required
when "ABC NG" is displayed in the viewfinder
or when the Auto Warning Indicator (129) on
the Remote Control Box (RGB) lights.
Note:
Since the black balance adjustment is always
automatically performed the picture wilt flash in
the viewfinder and on the monitor screen while
the black balance is being set. This flashing
indicates that the adjustment is currently being
performed and will cease once the adjustment
is completed.
128. Lens Iris Selection Switch (IRIS, MAN/AUTO)
This switch is used to set the lens iris of the auto
iris servo control zoom lens as follows.
Auto:
The
iris
level
of
the
lens
is
controlled
automatically.
Note:
Be sure to set the Iris Control Selection Switch
on the zoom lens to the AUTO posiiton.
MAN:
The iris level of the lens is controlled to the
desired level by using the Lens iris Control (130).
-
6
-