General, Press audio dub, Audio dubbing with panasonic hi-fi vcr – Panasonic NV-HS950AM User Manual
Page 40: Audio dubbing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio dubbing with Panasonic HI-FI VCR
General
a) Due to VHS format reasons, audio dubbing can be performed only on the normal audio track.
b) The Hi-Fi audio tracks cannot be influenced without erasing the video signal.
c) The audio dubbing function is provided with an automatic recording function. The volume level cannot be adjusted. When
dubbing to the Hi-Fi VCR, the volume level must be considered in advance.
d) There are three types of audio dubbing (A-C):
A. Audio dubbing on the normal audio track
1. Select the desired AV input.
1.2, The microphone input may also be selected. In this case, the microphone signal has priority.
Disconnect the microphone when other audio signals are to be used.
2. Locate the recording starting point and press PLAY-PAUSE.
3. Press AUDIO OUT three times to select the normal audio track.
4. Press AUDIO DUB.
5. Start audio dubbing by releasing the pause function.
6. After audio dubbing has been completed, rewind the tape and make sure that the normal audio track is selected. (Step 3)
7. Check the audio dubbing.
B. Audio dubbing on the normal audio track with Hi-Fi Mix function
1. Select the desired AV input.
2. Locate the recording starting point and press PLAY-PAUSE.
3. The Hi-Fi tracks should be set to playback.
•When a videocassette is inserted, the Hi-Fi tracks are automatically set to playback.
• Hi-Fi tracks must be recorded. Copy the audio signal, if necessary.
Press AUDIO DUB.
5. Start audio dubbing by releasing the pause function.
6. After audio dubbing has been completed, rewind the tape and set Audio System to HIFI-MIX. (See page 23.)
Check the audio dubbing.
The original sound and the new sound are heard simultaneously.
4.
7.
C.
Audio dubbing
on
the normal audio track with original sound and new sound
1. Select the desired AV input.
2. Locate the recording starting point and press PLAY-PAUSE.
3. The Hi-Fi tracks should be set to playback.
•When a videocassette is inserted, the Hi-Fi tracks are automatically set to playback.
• Hi-Fi tracks must be recorded. Copy the audio signal, if necessary.
4. Press AUDIO DUB.
• Input the original signals of the Hi-Fi tracks (Audio-Out) to a mixing console (optional) and mix with the new sound as
required.
5. Start audio dubbing by releasing the pause function.
6. After audio dubbing has been completed, rewind the tape and make sure that the normal audio track is selected. (Step 3)
7. Check the audio dubbing.
40