Battery installation – Panasonic KX-TM80-B User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Battery Installation
Install the included 9V size battery in the unit.
If the battery power is low or the battery is not installed, “Lo” flashes.
Replace with a new one. (If “Lo” flashes after installing a new battery, it will
disappear after 10 seconds. Simply disconnect the AC adaptor cord and
reinsert it again without removing the battery.)
The new battery’s retention time is approximately 1 day for recorded
messages and the clock {p. 10) during a power failure.
1
Open the cover by pushing
Install the battery in the battery compartment.
Snap on the terminals of
the battery to the battery
clip.
Close the cover.
Advertising
This manual is related to the following products: