Panasonic KX TG2396B - Manual (Page 5)

5 Special Features
5-A FLASH Button 5-B For Call Waiting Service Users
Pressing 1 FLASH I allows you to use special features of your host
PBX such as transferring an extension call or accessing special
telephone services (optional), such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “90,100,110, 250, 300,
400,600, 700 msec (milliseconds)”, using the handset near the
base unit. Your phone comes from the factory set to “700 msec".
The TALK indicator light must be off before programming.
AUTO ® # Press PROGRAM @ ^ Dialing button (Q] to ®)
» I FLASH I.
(T}: 90 msec (1): 100 msec 110 msec
250 msec [s): 300 msec 400 msec
600 msec 700 msec
' If 3 beeps sound after programming, a wrong key was pressed.
Start again from the beginning.
’ If a power failure occurs, the setting will return to the factory preset
(700 msec). Reprogram if necessary.
' If you are connected via a PBX, a longer flash time may be
necessary to use PBX functions (transferring a call, etc.). Consult
your PBX installer for the correct setting.
Press (FLASH) if you hear a call-waiting tone while talking.
• The first call is put on hold and you can answer the second call.
• To return to the first caller, press (FLASH) again.
• If this function does not operate properly, the flash time may not be
set correctly. Consult your telephone company for details. See section
5-A on how to adjust the flash time.
5-C Automatic Security Code Setting
Whenever you place the handset on the base unit, the unit
automatically selects one of a million security codes. These codes help
prevent the unauthorized use of your telephone line by another
cordless telephone user.
5-D Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press (TONE) before entering access numbers which require tone
dialing.
• The dialing mode changes to tone. You can enter numbers to access
an answering service, electronic banking service, etc. When you hang
up, the mode will return to pulse.
• Access numbers entered after pressing (TONE) will not be included
when redialing.
Special Features
Section 5
5-E How to use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press (PAUSE) if a pause is required for dialing with
a PBX or to access a long distance service.
Ex: Line access number (9) (PBX)
(D
^ IPAUSEI ^ [ Phone nurnber]
• Pressing (PAUSE) once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
• Pressing (PAUSE) more than once increases the length of the pause
between numbers.
5-F Handset Locator
You can locate the handset or page the handset user with beep tones.
^ Press [HANDSET LOCATO^ on the base unit.
• The IN USE indicator flashes and the handset beeps for 1 minute.
p To stop paging, press [HANDSET LOCATOR again or press
^ (TALK) twice on the handset.