How to use the jet of steam feature – Panasonic NI-350S User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Electronic 3-Way AUTO SHUT-OFF FUNCTION

(NI-552R/553R/560R/R20NR/R15NR/R16NROnly)

1. When the iron is left unmoved with its soleplate facing down or on its side for approx.

1. minute, the iron will automatically shut off power to the heater by itself.

2. When the iron is left unmoved on its heel rest for approx.

10 minutes, the iron will automatically shut off power to the heater by itself.

3. To turn the iron back on to resume ironing, simply move the iron in any way.

Reheat the iron until the indicator light goes out, if you have left the iron in its auto shut off

mode for 10 minutes or more.

NOTE: 1. The Auto shut off system works regardless of position of the temperature selector

dial, even at "OFF" position.

2. When you finish ironing, always unplug the iron.

iii Licensed under U.S. patent No. 4,686,352 and foreign counterparts.

HOW TO USE THE JET OF STEAM FEATURE

The jet of steam feature gives extra steam which goes deep into the garment and is

helpful for removing stubborn wrinkles. The jet of steam feature can be used only in

the "

" indication area of the temperature selector dial when steam or dry ironing

(If used at lower setting, water spotting will occur because the iron is not hot enough to

change water to steam). If you have not used the "Jet of Steam" feature for a long time,

it is necessary to clean the inside of the iron before using this feature on any clothes

to be ironed. Simply test the "Jet of Steam" feature several times away from the ironing

board and clothes to be ironed. This will prevent brown spotting or water spotting on

the clothes.

-

7

-

Advertising