Yamaha Disklavier PRO Series - Manual (Page 7)

Power Off Procedure
Changes to (A) page 13
If you were using a sound system, turn it off.
□
Disengage the Silent mode if it had been engaged. (See "Engaging the
Silent Mode" on page 9 of the Silent Operation Manual.)
Press the [STANDBY - ON] button on the Control Unit.
Set the MAINS switch to OFF.
Operating the Disklavier Pro’s MAINS switch is effectively the same as disconnecting the
power cable from an AC wall outlet. If the Disklavier Pro is used regularly, you only need
to use the [STANDBY - ON] button on the Control Unit. If the Disklavier Pro is not going
to be used for a long period, set the MAINS switch to OFF.
When the Disklavier Pro is powered off, wait at least 5 seconds before powering on again.
Display
Changes to (A) Chapter 6 "Song Number Indicator and Display'
In the song title display, brackets around the time display portion indicate that the Disklavier is in XP mode.
Brackets indicating XP Mode
I_____ i
Pic dfiO F'a[-"itast i c 10Fl Î! fit3]"i"
S0 :=
On/off pedal and continuous pedal indications represented by angle brackets and parentheses, respectively, are
not displayed for XP songs.
Angle brackets indicating
on/off pedal data
1~‘ i anj Fantast i < 00 !! 00
ES XG
Parentheses indicating
continuous pedal data (half pedal)
Piano F Hintast-ic Œ0« 00 V
ES XG
Changing the Default Song Tempo
When changing a song’s default tempo, tempo ranges are as follows.
Addition to (B) page 11
Range Default
Measures and beats
SMF 30 - 400 117
E-SEQ 30 - 280 117
Minutes and seconds
SMF -0.75% - +242% +000%
E-SEQ -0.75% - +140% +000%
m
3
w5*
3*
Chapter 2: Changes to the Mark IIXG Series Manuals (A) <& (B) Changing the Default Song Tempo