List of edit menu, Entering characters in the edit menu, Rotate the multi jog knob – Yamaha CDR-HD1500 User Manual
Page 57: Correcting the characters
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LIST OF EDIT MENU
■ Entering characters in the edit
menu
Entering the title characters by using the
MULTI JOG knob
1 .
Rotate the MULTI JOG knob.
When the
MULTI JOG knob is rotated clockwise, characlers
iippear in the order of alphabetical capital letters, alphiibelical
low'crcase letters, numbers, and symbols.
2.
Press the MULTI JOG knob to confirm the selected
character.
The cursor moves to the next space. Repetit steps 1 and 2 until
the title is complete. A title can contain up to 32 characters.
Entering the title characters by using the
alphabetical/numeric buttons on the remote
control
1 .
Select the character to be used for the title by using
the alphabetical/numeric buttons on the remote
control.
Alphabetical capital letters, alphabetical lower case letters, and
numbers switch each time the buttotis are pressed. To insert a
space, press SPACE. To use a symbol, press SYMBOL to select
the desired symbol.
2.
Select the next character by pressing one of the
alphabetical/numeric buttons.
The cursor tiutomaticariy moves to the iiexl space. Wheti you
need to use the button same to step 1, press ►w to move the
insertion point, then press the alphabetical/numeric button.
m
a
о
Correcting the characters
Move the cursor to the character to be corrected by pressing
KKi/<Ki
or
w>/w>i
or ►♦H on the remote control). To clear the
selected character, press CLEAR. To itisert a character before die
selected character, use the MULTI JOCi knob or alphahetical/
numeric buttons to select the character.
51