Document Outline

• IMPORTANT SAFETY INSTRUCTIONS
  • CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
  • CONTENTS
  • FEATURES
    • Built-in 5-channel power amplifier
    • Sound field features
    • Sophisticated AM/FM Tuner
    • Other features
    • I About this manual
  • GETTING STARTED
    • Supplied accessories
    • Instaliing batteries in the remote control
      • the battery compartment cover.
      • 2 Insert the two batteries supplied (AA, R06, UM-3) according to the polarity markings on the inside of the battery compartment.
      • 3 Slide the cover back on so that it snaps into place.
      • I Notes on batteries
    • Front panel
  • CONTROLS ANO FUNCTIONS
    • O STANDBY/ON
    • Note
      • 0 PRESET/TUNING
      • (EDIT)
      • © Remote control sensor
      • O FM/AM
      • © A/B/C/D/E
      • (NEXT)
      • o Front panel display
      • © PRESET/TUNING <!/[>
      • (SET MENU -/+)
      • © MEMORY (MAN’L/AUTO FM)
      • © TUNING MODE (AUTO/MAN’L MONO)
      • ® VOLUiWE
      • (D n PHONES (SILENT CINEMA)
      • © SPEAKERS A/B/OFF
      • © STEREO (EFFECT)
      • ® TONE CONTROL
      • © PROGRAM O/O
      • © BASS/TREBLE-/+
      • © INPUT MODE
      • © INPUT o/o
      • © 6CH INPUT
    • Remote control
      • O Infrared emitter
      • 0 Input selector buttons
      • 0 Sound field program/Numeric buttons
      • O LEVEL
      • 0 Cursor buttons /\/v'/</> / SELECT
      • © TEST
      • 0 STANDBY
      • © SYSTEM POWER
      • © SLEEP
      • ® 6CH INPUT
      • 0 CODE SET
      • © AMP
      • © VOLUME +/-
      • © MUTE
      • ® 6.1/5.1
      • © STEREO
      • © NIGHT
      • © SET MENU
      • ■ Using the remote control
      • I Handling the remote control
    • Front panel display
      • O Decoder indicators
      • O SILENT CINEMA indicator
      • O Headphones indicator
      • O Input source indicator
      • 0 Sound field indicator
      • 0 AUTO indicator
      • 0 MUTE indicator
      • 0 VOLUME level indicator
      • 0 PCM indicator
      • ® VIRTUAL indicator
      • 0 Multi-information display
      • © SP A B indicator
      • © NIGHT indicator
      • © SLEEP indicator
      • © HiFi DSP indicator
      • © CINEMA DSP indicator
      • © TUNED indicator
      • © STEREO indicator
      • © MEMORY indicator
      • ® LFE indicator
      • © Input channel indicator
  • CONNECTIONS
    • Before connecting components
      • ■ Connecting to digital jacks
        • Note
    • Connecting video components
      • ■ Connecting a video monitor
      • ■ Connecting a DVD player/digital TV/cable TV
      • ■ Connecting another video component
      • ■ Connecting a recording component
      • m COMPONENT VIDEO jacks
        • Note
    • Connecting audio components
      • ■ Connecting a CD player
      • ■ Connecting a CD recorder or MD recorder
        • Note
      • ■ Connecting the AM loop antenna
        • 1 Set up the AM loop antenna, then connect it to the terminals on this unit.
        • Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals.
        • Orient the AM loop antenna for the best reception.
        • Notes
    • Connecting an external decoder
      • Notes
        • Subwoofer
        • Front speakers (FR and FL)
        • Center speaker (C)
        • Surround speakers (SR and SL)
      • ■ Speaker connections
      • Connecting to the FRONT A SPEAKERS terminals
      • Connecting to the FRONT B, CENTER and SURROUND SPEAKERS terminals
        • FRONT SPEAKERS terminals
        • SURROUND SPEAKERS terminals
        • CENTER SPEAKER terminals
        • SUBWOOFER jack
        • Notes
      • ■ Connecting the AC power cord
      • ■ VOLTAGE SELECTOR
      • (Asia and General models only)
      • IMPEDANCE SELECTOR switch (U.S.A. and Canada models only)
    • Turning on the power
      • 0:0 :0 g
      • 1 Press STANDBY/ON (or SYSTEM POWER on the remote control) to turn on the power of this unit.
  • BASIC SYSTEM SETTINGS
    • Using the basic menu
      • 1 Press AMP.
      • 2 Press SET MENU.
      • 3 Press < / > to enter into the BASIC menu.
      • 4 Press /\ / \/ to change the display to the setting you want to alter.
      • 1 SETUP
      • 2 SP LEVEL
      • 5 Press < / > to enter the desired setting mode.
      • 6 Change the unit settings to suit your listening environment.
      • 7 Press /\ / \/ to exit from the set menu.
      • Basic menu operation sequence
      • BASIC SOUND INPUT
      • OPTION
    • Setting the unit to match your speaker system
      • (T) ROOM
      • (2) SUBWOOFER
      • (3) SPEAKERS
      • (4) SET or CANCEL
      • (5 Use the test tone to check the speaker levels.
      • Note
    • SP LEVEL
    • (Setting speaker output ieveis)
      • Note
        • (D L-R
        • (5) SWFR
  • PLAYBACK
    • Notes
      • Select a sound field program if desired.
    • ■ Playing video sources in the background
    • To mute the sound
    • ■ Selecting the 6CH INPUT
      • Note
        • Press MUTE on the remote control.
    • ■ Night listening mode
      • Press NIGHT on the remote control. (oT
    • ■ When you have finished using this unit
      • Press STANDBY/ON (STANDBY on the remote control) to set this unit in standby mode.
    • Input modes and indications
      • Press INPUT MODE repeatedly until the desired input mode is shown on the front panel display.
      • Notes
    • Selecting a sound field program
      • 1 Press AMP.
      • Press one of the sound field program buttons on the remote control to select the desired program.
      • After selecting the desired program, press the same button repeatedly to cycle through sub-programs If available.
      • Notes
      • m Selecting PRO LOGIC or PRO LOGIC II
        • 1 Select a 2-channel source and start playback on the source component.
        • 2 Press AMP.
        • 3 Press DO/DTS.
      • ■ Playing Dolby Digital EX or DTS ES material
        • Notes
      • m Virtual CINEMA DSP
        • Note
      • ■ To listen with headphones (SILENT CINEMA)
        • Notes
      • ■ Normal stereo reproduction
        • Press STEREO to turn off the sound effect for norma! stereo reproduction.
        • Notes
          • (While playing a source)
          • 1 Press AMP.
          • 2 Press /\ / \T to display the information about the input signal.
  • DIGITAL SOUND FIELD PROCESSING (DSP)
    • Understanding sound fields
      • ■ Recreating a sound field
    • HiFi DSP programs
  • CINEMA DSP
    • Straight Decode
    • Note
    • Sound field effects
      • ■ Dolby Digital/DTS + Matrix 6.1 + DSP sound field effect
      • Dolby Pro Logic + DSP sound field effect
      • ■ Dolby Pro Logic II
    • TUNING
      • Automatic tuning
      • ■ Manual tuning
        • Note
      • ■ Automatically presetting FM stations
        • 1 Press FM/AM to select the FM band.
        • Press TUNING MODE (AUTO/MAN’L MONO) until the “AUTO” indicator iights up on the front panel display.
        • Press and hold MEMORY (MAN’L/AUTO FM) for more than 3 seconds.
        • Automatic preset tuning options
      • ■ Manually presetting stations
    • SLEEP TIMER
      • ■ Setting the sleep timer
      • Canceling the sleep timer
    • RECORDING
      • 2—
      • Notes
        • 1 Turn on the power of this unit and all connected components.
        • 2 Select the source component you want to record from.
        • 3 start playback (or select a broadcast station) on the source component.
        • 4 Start recording on the recording component.
    • SET MENU
      • Set menu list
        • ■ BASIC MENU
          • 1 SETUP
          • 2 SP LEVEL (Speaker level)
        • ■ SOUND MENU
          • 1 SPEAKER SET
          • 2 SP DISTANCE (Speaker distance)
          • 3 LFE LEVEL (Low frequency effect level)
          • 4 D. RANGE (Dynamic range)
          • 5 CENTER GEQ (Center graphic equalizer)
          • 6 HP TONE CTRL (Headphone tone control)
        • ■ INPUT MENU
          • 1 I/O ASSIGN
          • 2 INPUT MODE
        • ■ OPTION MENU
          • 1 DISPLAY SET
          • 2 MEM. GUARD
          • 3 AUDIO MUTE
      • Adjusting the items on the set menu
        • Note
          • 1 Press AMP.
          • 2 Press SET MENU to enter the set menu.
          • 3 Press /\ / V- repeatedly to select the desired menu.
          • 4 Press < / > to enter the selected menu.
          • 5 Press /\ / \/ repeatedly to select the item you want to adjust.
      • SOUND 1 SPEAKER SET
      • (speaker mode settings)
        • Note
        • ■ 1A CENTER (center speaker mode)
          • Note
        • ■ 1B FRONT (front speaker mode)
          • LRG
          • SML
        • ■ 1C SURR (surround speaker mode)
          • LRG
          • SML
          • NON
        • ■ 1D BASS (bass out mode)
          • FRNT
          • BOTH
          • Note
      • SOUND 2 SP DISTANCE
      • (speaker distance)
        • 1 Press/\/\/to select “UNIT”.
        • 2 Press < / > to select the unit “meters” or “feet” to be used in setting.
        • 3 Press /\ / Nv to select a speaker.
        • 4 Press < / > to set the distance.
      • SOUNDS LEE LEVEL
        • 1 Press /\ / w to select the item to be adjusted.
        • 2 Press < to adjust the LFE level.
        • Note
      • SDUND 4 D. RANGE
      • (dynamic range)
        • MAX
        • ■ Setting by “meters”
        • ■ Setting by “feet”
          • Note
            • STD
            • MIN
      • SOUNDS CENTER GEO (center graphic equalizer)
        • 1 Press \/ to select a higher frequency and /\ to select a lower frequency.
        • 2 Press < / > to adjust the level of that frequency.
        • Note
      • SOUNDS HP TONE CTRL
      • (headphone tone control)
      • INPUT 1 1/0 ASSIGN (input/ output assignment)
        • For COMPONENT VIDEO jacks A (IhEh] ) and B
        • For OPTICAL INPUT jacks 1 (1B< 1)) and 2
        • For COAXIAL INPUT jack 3 {1C<3))
        • Notes
      • INPUT2 INPUTMODE
      • (initial input mode)
        • LAST
      • OPTION 1 DISPLAY SET
      • OPTION 2 MEM. GUARD (memory guard)
      • OPTION 3 AUDIO MUTE
        • -50dB
        • -20dB
    • ADVANCED SETUP MENU
      • Turn off the power fo this unit, and while holding down STEREO (EFFECT), press STANDBY/ON.
      • ■ ADVANCED SETUP menu items
        • Factory presets PREEiET
        • Note
          • < Asia and Genera! models only >
          • Tuner TU
          • Press STEREO (EFFECT) repeatedly to toggle between the available parameters.
          • Press STANDBY/ON to confirm your selection.
    • REMOTE CONTROL FEATURES
      • Control area
        • ■ Controlling this unit
        • ■ Controlling other components
      • Setting remote control codes
        • Note
        • Notes
      • Controlling other components
    • SETTING THE SPEAKER LEVELS
      • Adjusting the speaker levels during playback
      • Using the test tone
        • 1 Press AMP.
        • Press LEVEL repeatedly to select the speaker you want to adjust.
        • 3 Press < / > to adjust the speaker output level.
        • Notes
          • 1 Press AMP.
          • 2 Press TEST.
          • 3 Press /\ / \/ repeatedly to select a speaker to adjust.
          • 4 Press < / > to adjust the speaker output level.
          • 5 Press TEST when you have completed your adjustment.
        • Notes
    • EDITING SOUND FIELD PARAMETERS
      • Changing parameter settings
        • Note
          • 0 Repeat steps 2 through 4 if you wish to alter other parameters.
        • Note
          • 1 Press AMP.
          • 2 Select the sound field program you want to adjust.
          • 3 Press /\ / to select the parameters.
          • Press < / > to change the parameter value.
      • Sound field parameter descriptions
        • ■ DSP LEVEL
        • ■ DELAY
        • For 5ch Stereo
        • ■ CT LEVEL (Center level)
        • ■ SL LEVEL (Surround left level)
        • ■ SR LEVEL (Surround right level)
        • For PRO LOGIC II Music
        • ■ PANORAMA
        • ■ DIMENSION
        • ■ CT WIDTH (Center width)
    • TROUBLESHOOTING
      • ■ General
      • Tuner
      • Remote control
    • RESETTING THE FACTORY PRESETS
      • With the unit in standby mode, hold down STEREO (EFFECT) on the front panel and press STANDBY/ON.
      • Press STEREO (EFFECT) to select the desired setting.
      • Press STANDBY/ON to confirm your selection.
    • GLOSSARY
      • ■ CINEMA DSP
      • ■ Dolby Digital
      • ■ Dolby Pro Logic II
      • ■ Dolby Surround
      • ■ DTS (Digital Theater Systems) Digital Surround
      • ■ ITU-R
      • ■ LFE 0.1 channel
      • ■ Matrix 6.1
      • ■ PCM (Linear PCM)
      • ■ Sampling frequency and number of quantized bits
      • ■ SILENT CINEMA
      • ■ Virtual CINEMA DSP
    • SPECIFICATIONS
      • LIST OF REMOTE CONTROL CODES
      • TV
      • MD Recorder
      • CD player
      • CD Recorder
• YAMAHA