Connecting a cd player, Connecting a cd recorder or md recorder, Note – Yamaha HTR-5540 User Manual
Page 20: Connecting audio components
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
■ Connecting a CD player
Connect the coaxial digital output jack on your CD player
to the DIGITAL INPUT CD Jack.
\i/
• The AUDIO jacks are available for a CD player which does not
have coaxial digital output jack.
■ Connecting a CD recorder or MD
recorder
Connect the input jacks on your CD recorder or MD
recorder to the MD/CD-R OUT (REC) Jacks for analog
recording.
Connect the output Jacks on your CD recorder or MD
recorder to the MD/CD-R IN (PLAY) Jacks to play a
source from your recording component.
Note
• Once you have connected a recording component to this unit,
keep its power turned on while using this unit. If the power is
off, this unit may distort the sound from other components.
Connecting audio components
indicates signal direction
indicates left analog cables
^15Ifr indicates right analog cables
indicates coaxial cables
16