Ceiling, Control panel, Replacement of the oven lamp – Panasonic COMBI WAVE NE-C1153 User Manual
Page 25: Taking care gf vbur oven
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Taking Care gf Vbur Oven
6. Ceiling
Before cleaning, ensure oven has cooled to avoid
burns. Wipe the ceiling regularly with a damp cloth to
minimize build up of grease and smoke.
7. Control Panel
If the Control Panel becomes dirty, clean with a soft,
dry cloth. Do not use harsh detergents or abrasives on
Control Panel. Do not use a saturated cloth as the
remaining moisture may damage the panel. When
cleaning the Control Panel, keep the oven door open
to prevent the oven from accidentally turning on. After
cleaning, touch Stop/Reset Pad to clear display
window.
8. Replacement of the Oven Lamp
If the Oven Lamp burns out, It can be replaced by
following these directions.
1. Unplug the oven,
2. Remove the screw and the Oven Lamp Cover which
is located on the left side of the cabinet.
3. Replace the old bulb with a new one.
(use 220/240 V, 25 W max.,E-14 lamp.)
4. Reinstall the Oven Lamp Cover.
Caution-.Remove the plug from the electrical socket
before replacement of the Oven Lamp Bulb.
-
25
-