Menu setup – Channel Vision DVR-8N User Manual
Page 59
58
MENU SETUP
Use the
© , ª , § , ¨ buttons to move the cursor and use the (-), (+) buttons or wheel scroll of
mouse to change the value.
6.5.1.2 REC HDD INITIALIZE
At the HDD menu,
Move the cursor to REC HDD INITIALIZE using the
© , ª buttons.
Press the ENTER button when the cursor is on the REC HDD INITIALIZE and the following
screen appears.
If you want to initialize, move the cursor to “YES” and then press the “ENTER” button. If not,
move the cursor to “NO” and then press the “ENTER” button.
To exit this screen, press the ESC button.
To exit this HDD menu, press the “ESC” button again.
6.5.1.3 BACKUP HDD INITIALIZE
At the HDD menu,
Move the cursor to “BACKUP HDD INITIALIZE” using the
© , ª buttons.
Press the “ENTER” button when the cursor is on the “BACKUP HDD INITIALIZE” and the
following screen appears.
HDD MODE
- REC: Normal and Event recording
- BACKUP: Only for backup