Insertion / removal of the atari pc card, Sfc.'ooa.tjtlcasa, Using the player with computer – Panasonic KXL-807A User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Player with Computer
Insertion / Removal of the ATARI PC Card
Wjndows
660003?
The supplied ATARI PC card supports the Hot Swapping (Plug & Play) function. With
the computer turned on, you can insert/remove the ATARI PC card without fear of
hardware damage. Before removing the ATARI PC card, perform the following steps.
1 Click PC Card icon in task bar.
Stop Panasoriic KXLODD5
2
Click “Stop Panasonic KXLC005”.
Panatanic KXLC00&
CD
You may safely (emovc this device.
3
Make sure that the message “You may safely remove this device” is
displayed, then click
I
OKI.
4 Remove the ATAPI PC card.
c
№
5’
(d
(D
Q>
'<
<D
o
o
3
“D
Windows
Sfc.'Ooa.tJtlcasa?
With the computer turned on, you can insert/remove the ATAPI PC card, if a PC Card
Manager is installed on the computer (refer to your computer manual for details).
When you start running your computer, make sure that the ATARI PC card is inserted
into the PC card slot before turning on the computer. If your computer has more
than one slot, and if you want to re-insert the ATAPI PC card, you must insert it into the
same slot it was inserted when starting the computer.
Note:
• Do not remove the ATAPI PC card when the BUSY indicator (amber) is lit or
blinking, since data is being transferred between the computer and the player.
№l?
Windows
KFcEa?
With the computer turned on, you cannot insert/remove the ATAPI PC card. Please
turn off your computer to insert/remove the ATAPI PC card.
19