Clickfree C2N 3.5 - Manual (Page 12)

Clickfree C2N Home Backup (Mac) Backing Up
U SING THE B ACKUP L INK UTILITY
After the first backup on a computer, the Clickfree BackupLink utility is installed. You will
see an icon in the menu bar. We will reference this icon throughout this manual.
Click the icon in the menu bar and choose BackupLink Status.. This window shows all
computers that have been backed up onto the same C2N, and what their current status is:
• The computer you are currently working on is always listed first, followed by all other
computers that have been backed up onto the C2N.
• You can see which computer the C2N is currently connected to.
• A green checkmark indicates that it is ready for backup at any time. The last backup
date and time is shown.
• There is a Backup Now button beside each computer. You can start a backup on any of
the computers listed (not just your own). The backup will run over the network to
wherever the C2N is connected.
Set up an automatic backup schedule so you don’t have to worry about a thing. See
“Scheduling automatic backups” on page 18.
Copyright © 2010 Storage Appliance Corporation. 12