Focus or flange-back adjustment – Panasonic WV-BP100 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DC :

The mounted lens is one of the lenses listed on

pages 9,10 and 11 or one that requires the DC

control signal for auto iris control.

VIDEO :

The mounted lens requires video signal for auto

iris control.

Note ;

Refer to item (5) on page 5 for the lens selection

switch.

Screw

FOCUS OR FLANGE-BACK ADJUSTMENT

The

following

adjustment

should

be

made

by

qualified service personnel or system installers.

1. Loosen screws on the flange-back adjusting ring.

2. Turn the flange-back adjusting ring to the desired

position.

Caution :

Do

not

turn

this

ring

too

much

to

counterclockwise

as

this

could

damage

the

inner glass and CCD image sensor.

3. Tighten the screws on the flange-back adjusting

ring.

- 15 -

Advertising
This manual is related to the following products: