Panasonic DVD-CV52 - Manual (Page 4)

Accessories
I
0)
I
P
O
check and identify the suppiied accessories.
Use numbers indicated in parentheses when asking
for repiacement parts.
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
□ 2 Batteries
for remote control
□ 1 Audio/video cable
(K2KA6CA00001)
For Australia and N.Z.
(RJA0035-1X)
Connection
Basic connection
This page explains how to connect the unit to a television and set it up so you hear tpe audio through the television’s speakers. To get the full benefit from
the powerful 5.1-channel audio found on DVDs, you should connect an amplifier ar^d six speakers {* page 5).
Before connection /
•Disconnect the AC mains lead.
• Refer to the television’s operating instructions.
nnect your unit directly to your tetevlsion,
D q not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
noi be played correctly due to tfie copy guard.
S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OljJT terminal by separating the chrominance (C) and luminance (Y)
nals. (Actual results depend on the television.)
Television
X.
S video cable
(not included)
EQsr
When making this connection, ensure you connect the audio cables
the corresponding audio input terminals on the television.
-■■■■.■•■■■x-'T ■■■■■■
■4:C.-V
;iri:iiinH'-]:□ Ï1' i.*: ' ■ ...-v
For Australia and N.Z.
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference signals
(P b /P r ) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors.
•The description of the component video input terminals depends
on the television or monitor (e.g. Y/P b /P r , Y/B-Y/R-Y, Y/C b /C r ).
Connect to terminals of the same color.
Television
Video cable
(not included)
qp' -
Q>= =<E> ^
=<£>
^ COMPONENT '
VIDEO IN
ifo) Y
Pp.
►vy; re
When making this connection, ensure you connect the audio cables
^ to the corresponding audio input terminals on the teievision.__
(The illustration shows the model
for the United Kingdom and
Continental Europe.)
or the United Kingdom and Continental Europe
SCABT terminal
To improve picture quality, you can change the video signal output
from the AV terminal from “Video” to either “S-Video” or “RGB” to suit
the type of television you are using («• page 16, Video-AV Output).
Television
SCART terminal
VCR
mannanaGOD
ÙDDaanüGQDD
21-pin SCART cable
(not included)
-----------f?------------