Stereo reception (for tx-29ga30x only), Stereo reception (for tx-29ga30x) – Panasonic TC-29GA30R User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stereo Reception (For TX-29GA30X only).
1
Stereo/Bilingual Sound Selection Button
Sound output modes can be selected by
pushing the “Sound Selection” Button.
“STEREO” (if transmitted), "BILINGUAL” (if
transmitted) and “MONO" modes can be
selected using this button.
Note;
(1) The “A2 (German)” stereo/bilinguai TV
sound transmission system is used in the
following countries; Australia, Malaysia,
Thailand, Indonesia, etc.
The “NICAM” stereo TV sound transmis
sion system is used in the following
countries; New Zealand, Singapore and
Hong Kong.
(2) If the stereo signal is weak or the receiv
ing conditions are poor or if STEREO:
MONO automatic switching occurs, it is
recommended to switch to the “Mono”
Mode.
When the broadcasting mode changes to
“STEREO", "DUAL”, or “MONO" after you
have selected “MONO” mode, change
over to either “STEREO” or “MAIN"
Modes will be made automatically.
“DUAL” also known as "BILINGUAL"
mode is not currently transmitted in some
countries.