Pip (picture in picture) button - this, Pip (picture in picture) button, Control operation – Panasonic CT-27S20 User Manual
Page 14: Helpful hints, Tva^ideo button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Control Operation
(cont.)
Helpful Hints:
Press the TV Mode Selection button to operate TV
Remote functions, if necessary
PIP (Picture in Picture) Button - This
Feature allows monitoring one channel while watching
another when a second video source with a tuner is
connected (such as a VCR) to the television
NOTE:
When the Main Picture is in Video mode with no
signal, the PIP will not operate properly
TVA^ideo Button
— Press the TVA/IDEO button
to select desired input for Mam Picture or PIP frame
(when the PIP Frame is displayed)
Signal coming from
REAR VIDEO/AUDIO INPUT TERMINAI^
VIDEO
CH2
PIP Operation
1
Turn VCR ON and select a desired channel
2
Press the TV Mode Selection button to operate TV
Remote functions, if necessary
Press the PIP button (television must be ON) The
PIP frame will appear at the position it was last
displayed The Mam Picture Video Source and PIP
Video Source will display on screen momentanly
Audio will be that of Mam Picture
PIP
Signal coming from.
REAR VIDEO/AUDIO INPUT TERMINA
TV or CABLE
PIP Frema
Main Picture
Channel
Picture in
Picture
Channel
Picture in
Picture
Frame
Press the PIP button again to cancel PICTURE IN
PICTURE feature (if desired)
NOTE:
For PIP Video source connection, refer to the
PIP External Video and Antenna Connections
section
- 1 4 -