Optimizing ldap scheduling – Panasonic NN46110-600 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2 Configuring servers
29
2
From the
Encryption Key
options, select Text Encryption Key or Hex
Encryption Key.
3
In the
Encryption Key
dialog box, enter a character string or a hexadecimal
value.
Note:
The following is applicable only for Nortel VPN Router release
7.05.300 and above.
When TripleDes LDAP Encryption is not enabled, the Encryption Key
value that you enter is 8 bytes—8 ASCII text characters or 16 hex
characters. When TripleDes LDAP Encryption is enabled, the
Encryption Key value that you enter is 24 bytes—24 ASCII text
characters or 48 hex characters.
4
In the
Confirm Encryption Key
dialog box, enter the same value from step 3.
5
Click
OK
.
Note:
The default key is used to encrypt the passwords until a user
encryption key is entered. You can use DES or 3DES to encrypt
passwords stored in LDAP.
To change the existing encryption key for the 8 byte character string using the
CLI, enter the following command:
Idap-server encryptionkey-text <password>
To change the existing encryption key with the hexadecimal value, enter the
following command:
ldap-server encryptionkey-hex <password>
Optimizing LDAP scheduling
With the LDAP optimization scheduling option, the VPN Router administrator
can configure the time and day that the LDAP database is optimized.
Nortel VPN Router Security — Servers, Authentication, and Certificates