Irregular pulse function – Panasonic EW3006 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Irregular pulse function
If the pulse rate varies by more than ±25% from the average while a
measurement Is being taken, when measurement Is completed the
mark will be displayed.
■ The
mark will lit after approx. 6 seconds of blinking when the
measurement Is completed.
If the LAViWt'M mark Is lit, please take the measurement again.
In some cases, if the pulse rate fluctuates greatly while a measurement is
being taken. It may be Impossible to obtain an accurate reading.
Fig. 9-a
Fig. 9-b
(Flashes.)
(Approx.
6 seconds.)
If you save a reading where an Irregular pulse was recorded, the
mark will be displayed when you recall that reading (Fig. 9-b).
If the
mark Is displayed an Irregular pulse rate Is detected, not
necessarily due to atrial fibrillation. However If this mark continues to
display, consult your physician.
* This function Is designed to act as a guide to help you to obtain accurate
readings (Please see pages 12-14).
Even if the
mark is not displayed, we recommend that you take
measurements 2-3 times, resting 5 minutes between measurements.
* If the
mark is frequently displayed, please consult a health
professional for your health condition.
Don’t try to interpret readings or attempt to treat any condition
yourseif.
Aiways foiiow the guidance of a heaith professionai.
19