Panasonic CT-36VG50 - Manual (Page 40)

TV/PC/DTV
This feature is used to seiect the PC mode for monitor
display.
NOTE:
Connect a computer having a 15-pin output
terminal. If necessary, you can adjust the picture size and
position using the Dispiay Adjust menu.
1. Press .
2. Press ^ or W and ^ or ^ to highlight the
TV/PC/DTV (con.
3. Press 1^3 to display the TV/PC/DTV MODE menu.
4. Press or ^ to highlight PC (FRONT).
5. Press ^3 twice to exit menus.
Trilingual Animated Icons
PC Mode Icons
NOTE:
Only the selected icon (red) will be animated.
Picture Adjustments
Picture Norm
Use to reset Coior, Tint, Brightness, Picture, and
Sharpness to the factory preset level for PC Mode only.
1. Press .
2. Press ^ or ^ and or ^ to highlight the Picture
Icon.
3. Press ^3 to display the VIDEO Adjustment menu.
When there is no signal applied, the
icon menus in the PC and DTV mode
will appear small and distorted.
This is a normal condition.
4. Press A or W to highlight PICTURE NORM.
5. Press or ^ to select "SET to normalize Coior,
Tint, Brightness, Picture, and Sharpness for the PC
mode.
6. Press the twice to exit menus.
Color, Tint, Brightness, Picture, and
Sharpneiss
COLOR
- Adjust for desired coior intensity.
TINT
- Adjust for natural flesh tones.
BRIGHTNESS
- Adjust so dark areas of picture slightly
become black for a crisp detaii.
PICTURE
- Adjust the white areas of the picture as
desired.
SHARPNESS
- Adjust for best clarity of outline detaii.
1. Press .
2. Press A or^ and or ^ to highlight the Picture
Icon.
3. Press the
menu.
to display the VIDEO Adjustment
Press A or W to select the desired Video
Adjustment (Color, Tint, Brightness, Picture, or
Sharpness).
Press or ^ to adjust your selection. (The
selected Video Adjustment will be displayed.)
Repeat steps 4 and 5 for remaining Video
Adjustments.
7.
-
39
-
Press I twice to exit menus.