Preparation, 1 dialing mode selector: set to “tone, 2 ringer volume selector: set to “high – Panasonic Easa-Phone KX-T2322A User Manual
Page 4: Enclosurés, 3 recall selector, Set to “e re” or “t br
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect as shown.
Preparation
Do not use any handset other than
Panasonic handset made for the model
KX-T2322A/KX-T2342A.
1
Dialing Mode Selector:
Set to “TONE”.
DIALING MODE
PULSE•
•TONE
If dialing can not be done, set to
“PULSE”.
2
Ringer Volume Selector:
Set to “HIGH”.
RINGEFI
LOW
OFF* • • HIGH
LOW: The ringing sound will be low.
OFF: The telephone will not ring.
Replace all the batteries once a
jear, or misoperation may occur.
Do not use Nickel-Cadmium or
Alkaline batteries.
If the batteries are not instailed,
programming, and speakerphone or
monitor operation can not be done.
Enclosurés
AAA size batteries..................................3
Hardware .................................... 1 pack
j
3
Recall Selector;
Set to “E RE” or “T BR”.
T BR E RE
RECALL•
(depending on PBX type)
E RE...for PBX earth recall facility
T BR,..for PBX timed break register
recall facility
4
Insert the batteries observing the
correct polarity. (See page 13.)
-
3
-