Panasonic DVD-RV40 EN - Manual (Page 22)

0
§
1
с
I
N ) ✓
X|,sT
Flashes
Choose a track, then press ENTER.'^
i . Track Time
1 5............ 2:0г"'i J Clear i
® ® ® ■ 3 1“— . j Clear all
® ® ®
i 4 i i
5 1 ................... j
[Total time ■
6 1 ;
7 ;.............. !
8 I ;
; 2:02
, i^ress PLAY to start................ >
Track No.
Program No.
PLAY
“l] PLAY MODE
Random Playback
Press PLAY to start
Advanced operations
A Program play
ИЕЗ
The player plays the tracks on the disc In an order you specify.
Up to 32 tracks can be programmed.
1
Press [PLAY MODE] while stopped
until the illustrated screen appears.
• If “0” appears on the television, press [■ STOP] to cancel
RESUME function, then press [PLAY MODE].
2
Press the numeric buttons to select
the track.
{-► item @) on page 8 for number entry.)
The selected track is stored in the memory.
• If you press [ENTER], you can use the cursor buttons [A, T]
to select a track. Press [ENTER] to register the track
number.
• Repeat step 2 to select another track.
• If you enter over 32 tracks, the last programmed track Is
replaced with the new one.
3
Press
[►
PLAY].
Play now begins in the programmed sequence. * •
To exit the screen
Press [PLAY MODE] twice.
To add tracks
1. Press [■ STOP] twice during program play to show the program
play screen.
2. Select the available item with the cursor buttons [ A , ▼], then
repeat step 2.
• Press [◄◄, ►► SLOW/SEARCH] to turn the page of program to
make selections quicker.
To return to normal play
1. Press [■ STOP] twice during program play.
(Program play is suspended.)
2. Press [PLAY MODE] twice.
3. Press [► PLAY].
•The program is retained in the memory.
Operation by observing the unit’s FL display
• Use the numeric buttons to enter track numbers.
•To check the program, press the cursor buttons [A, ▼].
Clearing the program
When the program play screen is displayed
•To clear the programmed tracks one by one
Select the track, move to “Clear” with the cursor buttons [A, ▼, ◄,
► ] and press [ENTER]. (Selecting the track and pressing
[CANCEL] also clears the programmed track.)
•To clear the whole program
Move to “Clear all” with the cursor buttons [A, ▼, ◄, ►] and press
[ENTER]. (The program is also cleared when the player is switched
to the standby mode or turned off, or the disc tray is opened.)
в
Random play
The player plays the tracks on the disc in random order.
tl Press [PLAY MODE] while stopped
until the illustrated screen appears.
• If “0” appears on the television, press [■ STOP] to cancel
RESUME function, then press [PLAY MODE].
i Press [► PLAY].
Play now begins in random order.
PLAY
VQT8633
To exit the screen
Press [PLAY MODE] once.
To return to normal play
1. Press [■ STOP] twice during random play.
(Random play is suspended.)
2. Press [PLAY MODE] once.
3. Press [► PLAY],