Panasonic KX-F280C User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
▼ Button:
Page 4-10
DIRECTORY Button:
Page 4-10
AUTO Button:
Pages 4-5, 4-7, 4-11 and 4-13
O LCD (Liquid Crystal Display)
OSET Button:
Page 2-4
CLEAR Button:
Page 2-4
MENU Button:
Pages 2-4 and 5-2
O
PAPER OUT Indicator:
Pages 1-13 and 1-15
ALARM Indicator:
Page 1-15
0 HELP Button:
Page 2-17
© OVERSEAS/TRANSMIT SETTING
Button and Indicators:
Pages 5-16 and 5-17
O A Button:
Page 4-10
O LIGHT ORIGINAL Button
and Indicator/^ Key:
Pages 2-9 and 3-3
©RESOLUTION Button
and Indicators/P* Key:
Pages 2-9 and 3-3
O RECEIVE MODE Button
and Indicators:
Pages 1-18 and 3-7
0 Indicator;
Page 3-12
©TONE Button:
Page 5-31
0 Dial Keypad/Character Keys:
Pages 2-8 and 2-9
Used to put back the items in the electric telephone
directory.
Used to advance the items in the electric telephone
directory.
Used to enter the electric telephone directory mode.
Used for speed dialing.
Used to store parameters during programming.
Used to clear the previously entered parameters
during programming.
Used to start delayed transmission, system setup, etc.
The indicator lights when the recording paper roll is
empty.
The indicator lights when any trouble occurs.
Used to print an easy guide of programming
procedures.
Used for overseas facsimile transmission.
Also used to set the total page number before
transmission.
The indicators light when these features are on.
Used to transmit or copy originals with faint writing.
The indicator lights when this feature is on.
Also used as the cursor key during programming.
Used to adjust scanning line density. The indicators
light to show which setting you are using.
Also used as the cursor key during programming.
Used to select the desired receiving mode. The
indicators light to show the mode in which the unit is
set.
The indicator flashes when any new incoming
messages have been recorded.
Used to change the dialing mode from pulse to tone
during a dialing operation.
Used to dial phone numbers or enter parameters
while programming.
Also used as character keys when logo and station
names are programmed.
1-7