Matsushita electric industrial co., ltd, Operations, Vas (voice activated system) recording (rn-122) – Panasonic RN-102 User Manual

Page 2: Sle (sound level equalizer) recording (rn-122), Fast play selector, Pause, Fast forward and rewind, Tape counter and reset button (rn-122)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operations

■ Recording

1. Open the Cassette Compartment. Insert the cassette. Close

the cover.

2. Set the PAUSE Selector to "OFF”. (RN-102)

Set the VAS/PAUSE Selector to "VAS” if VAS feature Is
desired or "OFF” If not. And set the SLE Selector to "ON” if
desired. (RN-122)

3. Set the TAPE SPEED Selector as desired.

The "2.4" position is suggested for better sound quaiity.

(2.4 cm/sec., Standard play)

The “1,2" position makes it possible to record for 120 min,, using

60 min. microcassette tape. (1.2 cm/sec., Long play)

4. Press the REC Button. (The recording level is automatically

adjusted.)

•The Lighting of the REC/BATT Indicator shows that the tape is

running and recording is being made. (RN-122)

•When using VAS recording adjust the voice activation level

using the VOLUME Control. Normal settings are 4 to 7.

(RN-122)

5. To

Stop

recording, press the STOP/EJECT Buttort.

■ Playback

1 Set the FAST PLAY Selector to “FAST PLAY” if this feature Is

desired.

2. Press the PLAY Button.
3. Adjust the volume using the VOLUME Control and select the

desired tone; "HIGH” or "LOW” by setting the TONE
Selector, (RN-122)

4. To stop playback, press the STOP/EJECT Button.

•The monitor system enables you to listen, through the earphone to

the sound as It is being recorded. The monitor level can be adjusted
by the VOLUME Control.

•When recording, previously recorded signals on the tape vytll be

erased automatically.

•Recording can be started during playback by simply pressing the

REC Button.

■ Silent Auto>Stop (RN-122)

When the tape comes its end during playback (or recording), the

tape stops moving and the power is turned off. This is called "Silent
Auto-Stop". After silent auto-stop functions, be sure to press the

STOP/EJECT Button.

■ CUE and REVIEW (when the PLAY or REC

Button has been pressed.)

The recorded sound can be monitored at a fast speed, as long as the

FF/CUE or REW/REV Button is pressed.

•At the end of the tape, be sure to press the STOP Button.

(RN-102)

•If the tape reaches Its end except playing or recording, the

silent-stop system will not operate, so the STOP/EJECT

Button should be pushed to place the unit in the stop
condition. (RN-122)

■ VAS (Voice Activated System) recording

(RN-122)

In the VAS mode of operation, the recording starts automatically

when sound is picked up by the microphone and stops in about 4

seconds after there is no sound picked up by the microphone. This
feature is useful to minimize tape waste and lets the user give extra
thought to tile dication without the interruption of manually operating
the start and stop contiols while recording.

•To use the feature set the VAS/PAUSE Selector to “VAS".
•For normal recording level set to "4—7".

To record loud sounds only, set the VOLUME Control to "1 -3". To

recomi soft sounds, set it to “8—10". No sound is recorded at "0”.

■ SLE (Sound Level Equalizer) recording (RN-122)

SLE improves recording In remote locations, away from the source.

This is helpful in class and conference rooms.
The SLE Recording Indicator will turn to be green that recording is in

progress.

■ Fast Play Selector

Playback speed can be about 20% faster setting the FAST PLAY
Selector to “FAST PLAY".

■ Pause

The tape movement can be stopped temporarily by setting the

PAUSE Selector to “PAUSE”.

To resume ttie operation, set to “OFF".

Do not set to "PAUSE" for a long time to prevent the deformation of

the Pressure roller.

■ Fast Forward and Rewind

The tape will rewind rapidly when the REW/REV Button is pressed.

The tape will move forward rapidly when the FF/CUE Button is

pressed.

■ Tape Counter and Reset Button (RN-122)

The digits returns to “000" when the Reset Button is pressed. The

digits advance with the tape to provide a reference to quickly find a
desired portion of tape.

Notes

• Batteries installed with incorrect polarities may leak and damage

this unit.

•Do not mix batteries (old and new) or types (carbon and alkaline.)

•If the set is not used for a long period of time, or is used only from

an AC power source, remove ail the batteries to prevent potentiEü
damage due to possible battery leakage.

•Avoid using or placing this unit near sources of heat. Do not leave it

in an automobile exposed to direct sunlight for a long period of time
with the doors and windows closed, as this may deform the cabinet.

•Avoid spray-t^e insecticides. Some insecticides contain chemic­

als that could cause cabinet deformation.

Matsushita Electric Industrial Co., Ltd.

Advertising
This manual is related to the following products: