Installing your unit, Installing the recording paper – Panasonic KX-F900 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing your unit
Installing the recording paper
1
CD
® Open the back lid by liHing up the tabs
located on both sides
Install a recording paper roll in the mam
unit
■ Make
sure that the shiny side of the
paper IS facing down and there is no
slack, tape, or glue residue on the paper
roll
correct incorrect
Insert the leading edge of the recording paper
between the recording paper roller and the
silver plate
Close the back lid by gently pressing down
on both ends
Note:
■
Only use the included roll of paper or specified recording paper, or else the print quality may be affected
and/or excessive thermal head wear may occur
■The beginning of some recording paper rolls are secured with glue or tape
Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation
■
To order recording paper, see page B7
10