Panasonic OMNIVISION PV-V4611 - Manual (Page 16)

Timer Recording
POWER
SELECT/
SET
A:PUW
▼:STOP
◄:REW
► :FF
PROG/
VCR+
b^Ready Check List
□ All connections made (pg. 8, 10, 22).
O TVand VCR plugged in and turned on.
□ VCR/TV selector set to “VCR,”
□ Clock set correctly.
D Tape has rec. tab (pg. 4).
Q Remote in VCR mode. (Press VCR)
1 Press PROG/VCR+*
to display PROGRAM.
Г уся Pius* [»^pROG^ L
¡DATE START STOP
13 SAT-:-----
TOtWY
Press T
to display Program
screen.
Example
Today —
31— 1 —2' ^8—9
7 SELECTA/T Selection Order DAILY
L WEEKLY WEEKLY____________ WEEKLY _J
(SATl ■ (MON) (SUN)
If you are using a Cable Box, VCR
Timer Programming
Channel(Step 3) must be set to
the Cable Box output channel
AND your Cable Box must be
manually set to the desired
channel. The Cable Box power
left on.
If a power interruption occurs
while programming the timer, the
timer program(s) may be canceled.
If “TIMER PROGRAMS WERE LOST
DUE TO POWER INTERRUPTION”
appears on-screen, please reenter
the timer programs.
1) To set record DATE,
press
AT
to select:
1-31= one time, or
DAILY= MON- FRI, or
WEEKLY^ same time
each week
and press ► to set.
• See selection order
below left.
2) To set remaining
items, press AT to
select and press k- to
set START/ STOP times,
CH(channel) or LINE
input (pg.28), and tape
speed {SP. LP, SLP).
Press PROGA/CR+
to end program.
fvCRPius. T proq . rOsT~
P DT START " stop CH SPC
CANCEL :ADD/OLT
SELECT :
a T SET>
EXIT : PROG
To Enter More Programs,
press AT to select and
press ► to set an unused
program number and
repeat step 3.
Or
Press PROG/VCR+ again
to exit.
Press POWER off
to set the timer.
{‘TIMER" lights on Multi Function Display.)
16
For assistance, please call ; 1-800-211-PANA(7262) or send e-mail to : [email protected]