Tuning procedure ^ manual search – Panasonic TC-14ST15M User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
( Tuning Procedure ^
Manual Search
OR
1. PRE.
Press the "PRE" (PRESET) button
twice, setting the Manual Search
mode.
Press the "MAIN MENU" and
"Position" buttons, until
"MANUAL SEARCH" is selected.
AUTOSEARCH
I MWUAL SEARCH
COLOUR SYS AUTO
FINE TUNE
SKIP
OFF
Channel Number
Mainual search
condition.
2. V A
r
Press either the Channel Up or
Down button.
0
AUTOSEARCH
I MANUAL SEARCH |
COU3URSYS AUTO
Fit« TUNE
SKIP
OFF
Select the desired
Channel Number.
Press the Volume Up" +" or Down
■ -" button.
Volume" +": Next higher Channel
Volume" -": Next lower Channel
2
MANUALSEARCH
-1--------------------------
VL
Search Start.
Press the Position Left or Right
button.
Position left: Next lower Channel.
Position right: Next higher Channel.
AUTOSEARCH
I MANUAL SEARCH
COLOUR SYS AUTO
FINE TUNE
SKIP
OFF
The best tuning position is
automatically memorized.
1. If a clear picture with correct colours cannot be obtained when a broadcast or AV signal is received,
refer to the "Colour System Selection" operation on page 13.
2. After the Manual Search operation is finished, press the Channel Number "Up" button to confirm the tuning
condition for each Channel Number. If some Channel Numbers are unused, it is possible to skip such
Channel Numbers. Please refer to fee Channel Number Skip operation on page 11.
8