Panasonic SL-J120 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I

an^

We want to thank you for seiecting this product and to
welcome you to the growing family of satisfied

Technics product owners around the world.

We feel certain you will get maximum enjoyment

from this new addition to your home.

Please read these operating instructions carefully,
and be sure to keep them handy for convenient
reference.

Contents

Before use ...........................................................................2
Suggestions for Safety..................................................... 2

Accessories......................................................................... 3
Turntable Assembly ........................................................... 3

Connections.........................................................................3
Operation.......................................................................... 4

Adjustment ........................................................................

5

Replacement ....................................................................

5

Maintenance....................................................................

5

Troubleshooting Guide....................................................

6

Technical Specifications.................................................

6

Before Use

Be sure to disconnect the mains cord before adjusting the voltage
selector.

Use a minus (~) screwdriver to set the voltage selector (on the rear

panel) to the voltage setting for the area in which the unit will be

used.

(If the power supply In your area is 117 V or 120 V, set to the
"127 V" position.)

Note that this unit will be seriously damaged if this setting is not

made correctly. (There is no voltage selector for some countries;

the correct voltage is already set.)

Suggestions for Safety

a Use a standard AC wall outlet

1

. Use from an AC power source of high voltage, such as for

an air conditioner, is very dangerous.

There is the possibility that a fire might be caused by making

such a connection.

2. A DC power source cannot be used.

Be sure to check the power source carefully, especially on a

ship or other place where DC is used.

a

Grasp the plug when disconnecting the power

supply cord

1

. Wet hands are dangerous.

A dangerous electric shock may result if the plug is touched by
wet hands.

2. Never place heavy items on top of the power supply cord,

and never force it to bend sharply.

a

Place the unit where it will be well ventilated

Place this unit at least 10 cm (4") away from wall surfaces, etc.

a

Avoid places such as the following:

In direct sunlight or In other places where the temperature Is
high.
In places where there is excessive vibration or humidity.

Such conditions might damage the cabinet and/or other component

parts and thereby shorten the unit's service life.

a Be sure to place the unit on a flat, level surface

If the surface is inclined, a malfunction may result.

a

Never attempt to repair or reconstruct this unit

A serious electric shock might occur if this unit is repaired,

disassembled or reconstructed by unauthorized persons, or if the

internal parts are accidentally touched.

a

Take particular care if children are present

Never permit children to put anything, especially metal, inside this

unit. A serious electric shock or malfunction could occur if articles

such as coins, needles, screwdrivers, etc. are inserted through the

ventilation holes, etc. of this unit.

a

if water Is spilled on the unit

Be extremely careful if water is spilled on the unit, because a fire or

serious electric shock might occur. Immediately disconnect the

power cord plug, and consult with your dealer.

a

Avoid spray-type insecticides

Insecticides might cause cracks or "cloudiness" in the cabinet and

plastic parts of №is unit. The gas used in such sprays might,

moreover, be ignited suddenly.

a

Never use alcohol or paint thinner

These and similar chemicals should never be used, because they

might cause flaking or cloudiness of the cabinet finish.

a

Disconnect the power supply cord if the unit
will not be used for a long time

If the unit is left for a long time with the power ON, this will not only

shorten its useful operation life, but may also cause other troubles.

a

If trouble occurs

If, during operation, the sound Is interrupted or indicators no longer
illuminate, or if abnormal odor or smoke is detected, immediately

disconnect the power cord plug, and contact your dealer or an

Authorized Service Center.

-

2

-

Advertising