One time setup, Press power on the remote or unit, Process of setup – Panasonic OMNIVISION PVQ-1310 User Manual

Page 8: Language channel 1=9 clock, Select the language, Start channel auto set and clock auto set, One time setup ~ 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

One Time Setup

When the unit is turned on the first time, setup
mode is entered automatically.

Press POWER on

the remote or unit.

1

2

o

r V

SELECT LANGUAGE

PUSH CH A : English

OPRIMIR CH ▼ :Espa ol

APP. VOL + :Fran ais

3

CHANNEL/CLOCK AUTO SET

CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR

LOCAL PBS CH THEN,.,

PLEASE PUSH CH UP KEY

CH AUTO SET PROCEED I NO

AUTO CLOCK SET

PROCEEDING

Process of Setup

lo

Language channel 1=9 Clock

Select the language.

—for English

i ^

”0

—for

Spanish

^voL

(Español)

► O —for French

*

(Français)

If wrong language is set, complete “Reset all unit Memory

Functions” steps page 35.
If you use a cable box, it must be left on.

Start Channel Auto Set
and Clock Auto Set.

Press CH A.

V

Case 1 ] (Setup completed)

POWER

6/7/2000 WED 12:00PM

DST:ON

SETTING : CH 10

AUTO CLOCK SET

COMPLETED

END : PUSH CH UP KEY

Press CH A to exit.

• If your area observes

daylight saving time,

but you would like to

turn the DST feature
off, complete the
“To Set or Reset the
Clock” step on page
34 and set DST: OFF,

If your area obsen/es daylight saving

time and DST is set to ON, but the
time is incorrect: complete the Time
Zone Adjust steps on the next page.

.2 CHANNEL

/

a

UP

2

CHANNEL

DOWN

VOLUME
UP

Case 2 (Setup incomplete)

AUTO CLOCK SET

IS INCOMPLETE

PUSH ACT I ON TO SET CLOCK

See Case 2
next page.

IMPORTANT NOTE FOR AUTO CLOCK SET

• Auto clock set is performed the first time when the unit is turned off each day. If used, a cable box,must be left on and

tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.

• If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via AudioA/ideo Jacks, an RF coaxial cable must also be

connected for auto clock set and channel auto set features.

• If for any reason the time is changed manually, automatic time correction will not occur.

8

For assistance, call 1-800-211-PANA(7262)

Advertising
This manual is related to the following products: