Panasonic NV-SD250 - Manual (Page 14)

Setting the Clock of the VTR
The buift-in clock is used to activate the timer for automatic
recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
For Example:
Date; 16th, October. 1999
Time; 20:15
Preparation
• Confirm that the TV is on and the
VTR viewing channel is selected.
• Turn on the VTR,
• Press
VTR/TV to select the VTR
mode. (Only for NV-SD250EA.)
Time Reset Function
If the clock is less than two minutes
slow or fast, it can easily be reset to
the proper time.
For example:
Resetting the clock to 12:00.00.
1 Select CLOCK SET from OSD
menu and press ENTER,
2 When the current clock display on
the VTR is between 11:58 to 12:01
press
MENU as soon as you hear
the 12:00.00 time signal. This
resets the time to 12:00,00.
Operations On Screen Display
1
□ OSD MENU
•LANGUAGE
CLOCK SET
TUNE« PBESET
g ^ ode ch set
BLUE BACK
DEMONSmATION
SELECT :DB.EHTEB
END :MENU
1 Press MENU.
20
0
□
ENTER
OSD MENU
LANGUAGE
•CLOCKSET
TUNER PRESET
G-CODE CHSET
BLUE BACK
DEMONSTRATION
SELECT :afl.№TER
END tUENU
Select CLOCK SET.
2 Set each item by pressing A or ▼ and ►.
CLOCK SET
I Set Year “1999’
M D H:M
■ t999 - 1 1 0;IX)
5E1£CT:SD W+:DB
START: MENU
0
0
0
A Set Month “10”.
Y it D H:M
1999 aot t 0:00
SELECT; BS -i+:00
START:MENU
1 Set Date “16”.
Y M .0 H:M
1999 10 as;- 0:00
SELECT: DO -/+:DD
START: MENU
Y M D .-Nil,
1999 10 16 -,20:15-
SELECT:Da -/+;t
STABT:MENU
Set Time “20:15”.
•When it is kept pressed, the
indication changes in 30-minute
steps.
•There is no need to press ►.
Display Symbol
Q
Press MENU,
•The clock will start.
Note:
The clock operates for at least 5 minutes by its backup system in the event of power
failure.
14