Panasonic NV-VS3A User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
position during recording or playback so that you can easily
find it again iater for playback.
1
Reset the Tape Counter to zero at the tape
position from which you want to play back
later. (-» 72)
2
Set [DISPLAY] on the [OTHER FUNCTIONS]
Sub-Menu of the [CAMERA FUNCTIONS] O or
the [VCR FUNCTIONS] Main-Menu O to
[MEMORY].
3
Start playback or recording.
4
After playback or recording is finished:
Set the [CAMERA/OFF/VCR] Switch to [VCR].
5
Press the [►►] or [◄◄] Button.
The tape automatically stops approximately at the
position at which you reset the counter to zero.
•During High-Speed Rewinding, the Tape Counter shows
[0:00.00]. However, this does not activate the Memory Stop
Function.
74